A contact lens (also known simply as a contact) is a corrective, cosmetic, or therapeutic lens usually placed on the cornea of the eye. Leonardo da Vinci is credited with describing and sketching the first ideas for contact lenses in 1508[citation needed], but it was more than 300 years later before contact lenses were actually fabricated and worn on the eye. Modern soft contact lenses were invented by the Czech chemist Otto Wichterle and his assistant Drahoslav Lím, who also invented the first gel used for their production.
Contact lenses are tinted a faint blue to make them more visible when immersed in cleaning and storage solutions. Some cosmetic lenses are deliberately colored to alter the appearance of the eye. Some lenses now have a thin surface treatment which is a UV coating; this helps to reduce UV damage to the eye's natural lens.[1]
It has been estimated that 125 million people use contact lenses worldwide (2%),[2] including 28 to 38 million in the United States[2] and 13 million in Japan.[3] The types of lenses used and prescribed vary markedly between countries, with rigid lenses accounting for over 20% of currently-prescribed lenses in Japan, the Netherlands and Germany but less than 5% in Scandinavia.[2]
People choose to wear contact lenses for many reasons, often due to their appearance and practicality.[4] When compared with spectacles, contact lenses are less affected by wet weather, do not steam up, and provide a wider field of vision. They are more suitable for a number of sporting activities. Additionally, ophthalmological conditions such as keratoconus and aniseikonia may not be accurately corrected with glasses.
[edit] History
In 1888, Adolf Fick was apparently the first to successfully fit contact lenses, which were made from blown glass
Leonardo Da Vinci is frequently credited with introducing the idea of contact lenses in his 1508 Codex of the eye, Manual D, where he described a method of directly altering corneal power by submerging the eye in a bowl of water. Leonardo, however, did not suggest his idea be used for correcting vision—he was more interested in learning about the mechanisms of accommodation of the eye.[5]
René Descartes proposed another idea in 1636, in which a glass tube filled with liquid is placed in direct contact with the cornea. The protruding end was to be composed of clear glass, shaped to correct vision; however the idea was impracticable, since it would make blinking impossible.
In 1801, while conducting experiments concerning the mechanisms of accommodation, scientist Thomas Young constructed a liquid-filled "eyecup" which could be considered a predecessor to the contact lens. On the eyecup's base, Young fitted a microscope eyepiece. However, like Leonardo's, Young's device was not intended to correct refraction errors. Sir John Herschel, in a footnote of the 1845 edition of the Encyclopedia Metropolitana, posed two ideas for the visual correction: the first "a spherical capsule of glass filled with animal jelly", and "a mould of the cornea" which could be impressed on "some sort of transparent medium".[6] Though Herschel reportedly never tested these ideas, they were both later advanced by several independent inventors such as Hungarian Dr. Dallos (1929), who perfected a method of making molds from living eyes. This enabled the manufacture of lenses that, for the first time, conformed to the actual shape of the eye.
It was not until 1887 that a German glassblower, F.E. Muller, produced the first eye covering to be seen through and tolerated.[7] In 1887, the German ophthalmologist Adolf Gaston Eugen Fick constructed and fitted the first successful contact lens. While working in Zürich, he described fabricating afocal scleral contact shells, which rested on the less sensitive rim of tissue around the cornea, and experimentally fitting them: initially on rabbits, then on himself, and lastly on a small group of volunteers. These lenses were made from heavy blown glass and were 18–21mm in diameter. Fick filled the empty space between cornea/callosity and glass with a dextrose solution. He published his work, "Contactbrille", in the journal Archiv für Augenheilkunde in March 1888.
Fick's lens was large, unwieldy, and could only be worn for a few hours at a time. August Müller in Kiel, Germany, corrected his own severe myopia with a more convenient glass-blown scleral contact lens of his own manufacture in 1888.[8]
Also in 1887, Louis J. Girard invented a similar scleral form of contact lens.[9] Glass-blown scleral lenses remained the only form of contact lens until the 1930s when polymethyl methacrylate (PMMA or Perspex/Plexiglas) was developed, allowing plastic scleral lenses to be manufactured for the first time. In 1936, optometrist William Feinbloom introduced plastic lenses, making them lighter and more convenient.[10] These lenses were a combination of glass and plastic.
In 1949, the first "corneal" lenses were developed.[11][12][13][14] These were much smaller than the original scleral lenses, as they sat only on the cornea rather than across all of the visible ocular surface, and could be worn up to sixteen hours per day. PMMA corneal lenses became the first contact lenses to have mass appeal through the 1960s, as lens designs became more sophisticated with improving manufacturing (lathe) technology.
Early corneal lenses in the 1950s and 1960s were relatively expensive and fragile, resulting in the development of a market for contact lens insurance. Replacement Lens Insurance, Inc. (now known as RLI Corp.) phased out its original flagship product in 1994 after contacts became more affordable and easier to replace.
One important disadvantage of PMMA lenses is that no oxygen is transmitted through the lens to the conjunctiva and cornea, which can cause a number of adverse clinical effects. By the end of the 1970s, and through the 1980s and 1990s, a range of oxygen-permeable but rigid materials were developed to overcome this problem. Chemist Norman Gaylord played a prominent role in the development of these newer, permeable contact lenses.[15] Collectively, these polymers are referred to as "rigid gas permeable" or "RGP" materials or lenses. Although all the above lens types—sclerals, PMMA lenses and RGPs—could be correctly referred to as being "hard" or "rigid", the term hard is now used to refer to the original PMMA lenses which are still occasionally fitted and worn, whereas rigid is a generic term which can be used for all these lens types. That is, hard lenses (PMMA lenses) are a sub-set of rigid lenses. Occasionally, the term "gas permeable" is used to describe RGP lenses, but this is potentially misleading, as soft lenses are also gas permeable in that they allow oxygen to move through the lens to the ocular surface.
The principal breakthrough in soft lenses was made by the Czech chemists Otto Wichterle and Drahoslav Lim who published their work "Hydrophilic gels for biological use" in the journal Nature in 1959.[16] This led to the launch of the first soft (hydrogel) lenses in some countries in the 1960s and the first approval of the "Soflens" material by the United States Food and Drug Administration (FDA) in 1971. These lenses were soon prescribed more often than rigid lenses, mainly due to the immediate comfort of soft lenses; by comparison, rigid lenses require a period of adaptation before full comfort is achieved. The polymers from which soft lenses are manufactured improved over the next 25 years, primarily in terms of increasing the oxygen permeability by varying the ingredients making up the polymers. In 1972 British optometrist Rishi Agarwal was first to suggest disposable soft contact lenses.[17][18]
In 1999, an important development was the launch of the first silicone hydrogels onto the market. These new materials encapsulated the benefits of silicone—which has extremely high oxygen permeability—with the comfort and clinical performance of the conventional hydrogels which had been used for the previous 30 years. These lenses were initially advocated primarily for extended (overnight) wear although more recently, daily (no overnight) wear silicone hydrogels have been launched.
In a slightly modified molecule, a polar group is added without changing the structure of the silicone hydrogel. This is referred to as the Tanaka monomer because it was invented and patented by Kyoichi Tanaka of Menicon Co. of Japan in 1979. Second-generation silicone hydrogels, such as galyfilcon A (Acuvue Advance, Vistakon) and senofilcon A (Acuvue Oasys, Vistakon), use the Tanaka monomer. Vistakon improved the Tanaka monomer even further and added other molecules, which serves as an internal wetting agent.[19]
Comfilcon A (Biofinity, CooperVision) was the first third-generation polymer. The patent claims that the material uses two siloxy macromers of different sizes that, when used in combination, produce very high oxygen permeability (for a given water content). Enfilcon A (Avaira, CooperVision) is another third-generation material that's naturally wettable. The enfilcon A material is 46% water.[19]
[edit] Types of contact lenses
Contact lenses are classified in many different manners.[20][21]
[edit] Functions
[edit] Corrective contact lenses
A corrective contact lens is designed to improve vision. In many people, there is a mismatch between the refractive power of the eye and the length of the eye, leading to a refraction error. A contact lens neutralizes this mismatch and allows for correct focusing of light onto the retina. Conditions correctable with contact lenses include myopia (near or short sightedness), hypermetropia (far or long sightedness), astigmatism and presbyopia. Contact wearers must usually take their contact lenses out every night or every few days, depending on the brand and style of the contact. Recently, there has been renewed interest in orthokeratology, the correction of myopia by deliberate overnight flattening of the cornea, leaving the eye without contact lens or eyeglasses correction during the day.
For those with certain color deficiencies, a red-tinted "X-Chrom" contact lens may be used. Although the lens does not restore normal color vision, it allows some colorblind individuals to distinguish colors better.[22][23]
ChromaGen lenses have been used and these have been shown to have some limitations with vision at night although otherwise producing significant improvements in color vision.[24] An earlier study showed very significant improvements in color vision and patient satisfaction[25]
Later work that used these ChromaGen lenses with dyslexics in a randomised, double-blind, placebo controlled trial showed highly significant improvements in reading ability over reading without the lenses[26] This system has been granted FDA approval in the USA.
[edit] Cosmetic contact lenses
A woman wearing a cosmetic type of contact lenses
A cosmetic contact lens is designed to change the appearance of the eye. These lenses may also correct the vision, but some blurring or obstruction of vision may occur as a result of the color or design. In the USA, the Food and Drug Administration frequently calls non-corrective cosmetic contact lenses decorative contact lenses. These types of lenses tend to cause mild irritation on insertion, but after the eyes become accustomed, are typically well tolerated. As with any contact lens, cosmetic lenses carry risks of mild and serious complications, including ocular redness, irritation, and infection. All individuals wearing cosmetic lenses need to be followed by an eye care provider in order to avoid potentially blinding complications.
Theatrical contact lenses are a type of cosmetic contact lens that are used primarily in the entertainment industry to make the eye appear confusing and arousing in appearance,[citation needed] most often in horror film and zombie movies, where lenses can make one's eyes appear demonic, cloudy and lifeless, or even to make the pupils of the wearer appear dilated to simulate the natural appearance of the pupils under the influence of various illicit drugs.
Scleral lenses cover the white part of the eye (i.e. sclera) and are used in many theatrical lenses. Due to their size, these lenses are difficult to insert and do not move very well within the eye. They may also hamper the vision as the lens has a small area for the user to see through. As a result they generally cannot be worn for more than 3 hours as they can cause temporary vision disturbances.[27]
Similar lenses have more direct medical applications. For example, some lenses can give the iris an enlarged appearance, or mask defects such as absence of (aniridia) or damage to (dyscoria) the iris.
A new trend in Japan and South Korea is the circle contact lens. Circle lenses appear to be bigger because they are not only tinted in areas that cover the iris of the eye, but tinted prominently in the extra-wide outer ring of the lens. The result is the appearance of a bigger, wider iris.
Although many brands of contact lenses are lightly tinted to make them easier to handle, cosmetic lenses worn to change the color of the eye are far less common, accounting for only 3% of contact lens fits in 2004.[28]
Cosmetic contact lenses may represent a health risk.[29]
[edit] Therapeutic contact lenses
Soft lenses are often used in the treatment and management of non-refractive disorders of the eye. A bandage contact lens protects an injured or diseased cornea from the constant rubbing of blinking eyelids thereby allowing it to heal.[30] They are used in the treatment of conditions including bullous keratopathy, dry eyes, corneal ulcers and erosion, keratitis, corneal edema, descemetocele, corneal ectasis, Mooren's ulcer, anterior corneal dystrophy, and neurotrophic keratoconjunctivitis.[31] Contact lenses that deliver drugs to the eye have also been developed.[32]
[edit] By constructional material
Contact lenses, other than the cosmetic variety, become almost invisible once inserted in the eye. Most corrective contact lenses come with a light "handling tint" that may render the lens slightly more visible on the eye
The first contact lenses were made of glass, which caused eye irritation, and were not wearable for extended periods of time. But when William Feinbloom introduced lenses made from polymethyl methacrylate (PMMA or Perspex/Plexiglas), contacts became much more convenient. These PMMA lenses are commonly referred to as "hard" lenses (this term is not used for other types of contact lens).
However, PMMA lenses have their own side effects: no oxygen is transmitted through the lens to the cornea, which can cause a number of adverse clinical events. In the late 1970s, and through the 1980s and 1990s, improved rigid materials—which were also oxygen-permeable—were developed. Collectively, these polymers are referred to as rigid gas permeable or 'RGP' materials or lenses. One advantage of hard lenses is that, due to their non-porous nature, they do not absorb chemicals or fumes. The absorption of such compounds by other types of contacts can be a problem for those who are routinely exposed to painting or other chemical processes.
Rigid lenses offer a number of unique properties. In effect, the lens is able to replace the natural shape of the cornea with a new refracting surface. This means that a regular (spherical) rigid contact lens can provide good level of vision in people who have astigmatism or distorted corneal shapes as with keratoconus.
While rigid lenses have been around for about 120 years, soft lenses are a much more recent development. The principal breakthrough in soft lenses made by Otto Wichterle led to the launch of the first soft (hydrogel) lenses in some countries in the 1960s and the approval of the 'Soflens' material (polymacon) by the United States FDA in 1971. Soft lenses are immediately comfortable, while rigid lenses require a period of adaptation before full comfort is achieved. The polymers from which soft lenses are manufactured improved over the next 25 years, primarily in terms of increasing the oxygen permeability by varying the ingredients making up the polymers.
A small number of hybrid rigid/soft lenses exist. An alternative technique is piggybacking of contact lenses, a smaller, rigid lens being mounted atop a larger, soft lens. This is done for a variety of clinical situations where a single lens will not provide the optical power, fitting characteristics, or comfort required.
In 1999, 'silicone hydrogels' became available. Silicone hydrogels have both the extremely high oxygen permeability of silicone and the comfort and clinical performance of the conventional hydrogels. These lenses were initially advocated primarily for extended (overnight) wear, although more recently daily (no overnight) wear silicone hydrogels have been approved [33] and launched.
While it provides the oxygen permeability, the silicone also makes the lens surface highly hydrophobic and less "wettable." This frequently results in discomfort and dryness during lens wear. In order to compensate for the hydrophobicity, hydrogels are added (hence the name "silicone hydrogels") to make the lenses more hydrophilic. However the lens surface may still remain hydrophobic. Hence some of the lenses undergo surface modification processes by plasma treatments which alter the hydrophobic nature of the lens surface. Other lens types incorporate internal rewetting agents to make the lens surface hydrophilic. A third process uses longer backbone polymer chains that results in less cross linking and increased wetting without surface alterations or additive agents.
[edit] By wear time
A daily wear contact lens is designed to be removed prior to sleeping. An extended wear (EW) contact lens is designed for continuous overnight wear, typically for 6 or more consecutive nights. Newer materials, such as silicone hydrogels, allow for even longer wear periods of up to 30 consecutive nights; these longer-wear lenses are often referred to as continuous wear (CW). Generally, extended wear lenses are discarded after the specified length of time. These are increasing in popularity, due to their convenience.[citation needed] Extended- and continuous-wear contact lenses can be worn for such long periods of time because of their high oxygen permeability (typically 5-6 times greater than conventional soft lenses), which allows the eye to remain healthy.
Extended lens wearers may have an increased risk for corneal infections and corneal ulcers, primarily due to poor care and cleaning of the lenses, tear film instability, and bacterial stagnation. Corneal neovascularization has historically also been a common complication of extended lens wear, though this does not appear to be a problem with silicone hydrogel extended wear. The most common complication of extended lens use is conjunctivitis, usually allergic or giant papillary conjunctivitis (GPC), sometimes associated with a poorly fitting contact lens.
[edit] By frequency of replacement
The various soft contact lenses available are often categorized by their replacement schedule. The shortest replacement schedule is single use (daily disposable) lenses, which are disposed of each night. Shorter replacement cycle lenses are commonly thinner and lighter, due to lower requirements for durability against wear and tear, and may be the most comfortable in their respective class and generation. These may be best for patients with ocular allergies or other conditions, because it limits deposits of antigens and protein. Single use lenses are also useful for people who use contacts infrequently, or for purposes (e.g. swimming or other sporting activities) where losing a lens is likely. More commonly, contact lenses are prescribed to be disposed of on a two-week or monthly basis. Quarterly or annual lenses, which used to be very common, have lost favor because a more frequent disposal schedule allows for thinner lenses and limits deposits. Rigid gas permeable lenses are very durable and may last for several years without the need for replacement. PMMA hard lenses were very durable, and were commonly worn for 5 to 10 years. Interestingly, a careful analysis of the materials used to manufacture many 'daily' disposable lenses show that they are often manufactured from the same material (e.g. silicone-hydrogel [senofilcon-A]) as the longer life disposables (monthly replacement for example), from the same company. The lenses often differ only in terms of diameter or base curve.
[edit] By design
A spherical contact lens is one in which both the inner and outer optical surfaces are portions of a sphere. A toric lens is one in which either or both of the optical surfaces have the effect of a cylindrical lens, usually in combination with the effect of a spherical lens. Myopic (nearsighted) and hypermetropic (farsighted) people who also have astigmatism and who have been told they are not suitable for regular contact lenses may be able to use toric lenses. If one eye has astigmatism and the other does not, the patient may be told to use a spherical lens in one eye and a toric lens in the other. Toric lenses are made from the same materials as regular contact lenses but have a few extra characteristics:
• They correct for both spherical and cylindrical aberration.
• They may have a specific 'top' and 'bottom', as they are not symmetrical around their centre and must not be rotated. Lenses must be designed to maintain their orientation regardless of eye movement. Often lenses are thicker at the bottom and this thicker zone is pushed down by the upper eyelid during blinking to allow the lens to rotate into the correct position (with this thicker zone at the 6 o'clock position on the eye). Toric lenses are usually marked with tiny striations to assist their fitting.
• They are usually more expensive to produce than non-toric lenses; therefore they are usually meant for extended wear. The first disposable toric lenses were introduced in 2000 by Vistakon.
Like eyeglasses, contact lenses can have one (single vision) or more (multifocal) focal points.
For correction of presbyopia or accommodative insufficiency multifocal contact lenses are almost always used; however, single vision lenses may also be used in a process known as monovision:[34] single vision lenses are used to correct one eye's far vision and the other eye's near vision. Alternatively, a person may wear single vision contact lenses to improve distance vision and reading glasses to improve near vision.
Rigid gas permeable bifocal contact lenses most commonly have a small lens on the bottom for the near correction, when the eyes are lowered to read, this lens comes into the optical path. RGPs must translate (move vertically) to work properly, and thus the gaze of the eye can change from the near to the distant sections, much like bifocal eyeglasses.
Multifocal soft contact lenses are more complex to manufacture and require more skill to fit. All soft bifocal contact lenses are considered "simultaneous vision" because both far and near vision corrections are presented simultaneously to the retina, regardless of the position of the eye. Of course, only one correction is correct, the incorrect correction causes blur. Commonly these are designed with distance correction in the center of the lens and near correction in the periphery, or vice versa.
[edit] Implantation
Intraocular lenses, also known as an implantable contact lenses, are special small corrective lenses surgically implanted in the eye's posterior chamber behind the iris and in front of the lens to correct higher degrees of myopia and hyperopia.
[edit] Manufacturing of contact lenses
Most contact lenses are mass produced.
• Spin-cast lenses – A spin cast lens is a soft contact lens manufactured by whirling liquid silicone in a revolving mold at high speed.[35]
• Lathe turned – A lathe turned contact lens is cut and polished on a CNC lathe.[35] The lens starts out as a cylindrical disk held in the jaws of the lathe. The lathe is equipped with an industrial grade diamond as the cutting tool. The CNC Lathe turns at nearly 6000 RPM (revolutions per minute) as the cutter removes the desired amount of material from the inside of the lens. The concave (inner) surface of the lens is then polished with some fine abrasive paste, oil, and a small polyester cottonball turned at high speeds. In order to hold the delicate lens in reverse manner, wax is used as an adhesive. The convex (outer) surface of the lens is thus cut and polished by the same process.
• Molded – Moulding is used to manufacture some brands of soft contact lenses. Rotating moulds are used and the molten material is added and shaped by centrifugal forces. Injection moulding and computer control are also used to create nearly perfect lenses.[36].
• Hybrids
Although many companies make contact lenses, in the US there are four major manufacturers:[37]
• Acuvue/Vistakon (Johnson & Johnson)
• Ciba Vision (Novartis)
• Bausch & Lomb
• CooperVision
[edit] Hydrogel materials
• Alphafilcon A
• Asmofilcon A
• Balafilcon A
• Comfilcon A
• Enfilcon A
• Galyfilcon A
• Hilafilcon A
• Hilafilcon B
• Hioxifilcon
• Lotrafilcon B
• Methafilcon A
• Omafilcon A
• Phemfilcon A
• Polymacon
• Senofilcon
• Tetrafilcon A
• Vifilcon A
[edit] Contact lens prescriptions
The prescribing of contact lenses is usually restricted to appropriately qualified eye care practitioners. In countries such as the United States (where all contact lenses are deemed to be medical devices by the Food and Drug Administration), the United Kingdom and Australia, optometrists are usually responsible. In France and eastern European countries, ophthalmologists play the major role. In other parts of the world, opticians usually prescribe contact lenses. Prescriptions for contact lenses and glasses may be similar, but are not interchangeable.
The practitioner or contact lens fitter typically determines an individual's suitability for contact lenses during an eye examination. Corneal health is verified; ocular allergies or dry eyes may affect a person's ability to wear contact lenses successfully.
The parameters specified in a contact lenses prescription may include:
• Material (e.g. Oxygen Permeability/Transmissibility (Dk/L, Dk/t), water content, modulus)
• Base curve radius (BC, BCR)
• Diameter (D, OAD)
• Power in dioptres – Spherical, Cylindrical and/or reading addition)
• Cylinder axis
• Center thickness (CT)
• Brand
Many people already wear contact lenses ordered over the Internet. In the United States, the Fairness to Contact Lens Consumers Act, which went into effect in 2004, was intended to ensure the availability of contact lens prescriptions to patients.[38] Under the law consumers have a right to obtain a copy of their contact lens prescription, allowing them to fill that prescription at the business of their choice. Some controversy has arisen over the fact that online vendors are allowed to fill a prescription if the originating prescriber doesn't respond within eight business hours, as verifications are often sent during the prescriber's closed hours, allowing even an expired prescription to be filled.[38]
[edit] Complications
Complications due to contact lens wear affect roughly 5% of contact lens wearers each year.[39] Excessive wear of contact lenses, particularly overnight wear, is associated with most of the safety concerns. Problems associated with contact lens wear may affect the eyelid, the conjunctiva, the various layers of the cornea,[40] and even the tear film that covers the outer surface of the eye.[39]
Studies conducted on side effects from long-term wearing of contact lenses, i.e. over 5 years, such as by Zuguo Liu et al., 2000,[41] concludes that "Long-term contact lens wear appears to decrease the entire corneal thickness and increase the corneal curvature and surface irregularity."
Long-term wear of rigid contact lens is associated with decreased corneal keratocyte density[42] and increased number of epithelial Langerhans cells.[43]
[edit] Eyelid
• Ptosis
[edit] Conjunctiva
• Giant papillary conjunctivitis
• Superior limbic keratoconjunctivitis
[edit] Cornea
• Epithelium
o Corneal abrasion
o Corneal erosion
o Corneal ulcer
o Hypoxia
• Stroma
o Infection and keratitis
Bacteria
Protozoa: Acanthamoeba
Fungal: Fusarium[44]
o Contact lens acute red eye (CLARE)
o Keratoconus
• Corneal endothelium
[edit] Usage
Before touching the contact lens or one's eyes, it is important to thoroughly wash & rinse hands with a soap that does not contain moisturizers or allergens such as fragrances. The soap should not be antibacterial due to risk of improper hand washing and the possibility of destroying the natural bacteria found on the eye. These bacteria keep pathogenic bacteria from colonizing the cornea. The technique for removing or inserting a contact lens varies slightly depending upon whether the lens is soft or rigid.
In all cases, the insertion and removal of lenses requires some training and practice on the part of the user, in part to overcome the instinctual hesitation against actually touching the eyeball with one's fingertip.
[edit] Insertion
Inserting a contact lens
Contact lenses are typically inserted into the eye by placing them on the index finger with the concave side upward and raising them to touch the cornea. The other hand may be employed to keep the eye open. Problems may arise particularly with disposable soft lenses; if the surface tension between the lens and the finger is too great the lens may turn itself inside out; alternatively it may fold itself in half. When the lens first contacts the eye, a brief period of irritation may ensue as the eye acclimatizes to the lens and also (if a multi-use lens is not correctly cleansed) as dirt on the lens irritates the eye. Irrigation may help during this period, which generally should not exceed one minute. It may be noted that although with some types of contact lenses it is easy to tell if you have inserted the lens backwards (as it is usually painful and vision is impaired) you are able to determine the lens's correct position beforehand by holding the lens on the tip of your finger and squeezing the bottom of it with two fingers from your other hand, you will know you have it the correct way if the edges of the lens curve inward like a taco. If they curve out you need to flip the lens. With some types of lenses however, this is difficult as both sides look very much the same. With many lenses it is hard to tell whether they are inside out or not even when they are in the eye itself. This is because the vision and feel of the lens can be very similar for both sides. For these reasons many people try to ensure they keep visual track of the different sides of the contact lenses from the day they are open, if they suspect the lens is inside out they can always change its orientation at a later stage. It is never advisable to wear the lenses inside-out even if they feel comfortable and vision is good when doing so.
[edit] Removal
A soft lens may be removed by holding the eyelids open and grasping the lens with opposing digits. This method may cause irritation, could risk damage to the eye and may in many cases be difficult, in part due to the blink reflex. If the lens is pushed off the cornea (by touching the lens with your forefinger and looking towards your nose, moving the lens) it will buckle up (due to the difference in curvature), making it easier to grasp.
As an alternative method to grasping, once the lens is moved off the cornea to the inner corner of the eye, it can be pushed out of the eye by pressing downwards on the upper eyelid with a finger. With this method there is less risk of touching the eye with the fingers, and it may be easier for people with long fingernails.
Rigid contact lenses may be removed by pulling with one finger on the outer or lateral canthus, then blinking to cause the lens to lose adhesion. The other hand is typically cupped underneath the eye to catch the lens. There also exist small tools specifically for removing lenses, which resemble small plungers made of flexible plastic; the concave end is raised to the eye and touched to the lens, forming a seal stronger than that of the lens with the cornea and allowing the lens to be removed from the eye.
[edit] Care
This section contains instructions, advice, or how-to content. The purpose of Wikipedia is to present facts, not to train. Please help improve this article either by rewriting the how-to content or by moving it to Wikiversity or Wikibooks. (October 2009)
Lens cover to store contact lens
While daily disposable lenses require no cleaning, other types require regular cleaning and disinfecting in order to retain clear vision and prevent discomfort and infections by various microorganisms including bacteria, fungi, and Acanthamoeba, that form a biofilm on the lens surface. There are a number of products that can be used to perform these tasks:
• Multipurpose solution – The most popular cleaning solution for contact lenses. Used for rinsing, disinfecting, cleaning and storing the lenses. Using this product eliminates the need for protein removal enzyme tablets in most cases. Some multipurpose solutions are not effective at disinfecting Acanthamoeba from the lens.[45] In May 2007, one brand of multipurpose solution was recalled due to a cluster of Acanthamoeba infections.[46][47] Newer generations of multipurpose solutions are effective against bacteria, fungi, and acanthamoeba and are designed to condition the lenses while soaking.
• Saline solution – Used for rinsing the lens after cleaning and preparing it for insertion. Saline solutions do not disinfect the lenses.
• Daily cleaner – Used to clean lenses on a daily basis. A few drops of cleaner are applied to the lens while it rests in the palm of the hand, then the lens is rubbed for about 20 seconds with a fingertip (depending on the cleaner's directions) on each side. Long fingernails can damage the lens, so care should be taken.
• Hydrogen peroxide solution – Used for disinfecting the lenses, and available as 'two-step' or 'one-step' systems. If using a 'two-step' product, one must ensure that the lens taken out of the hydrogen peroxide is neutralized before it is worn, or else wear will be extremely painful. Saline must be used to rinse away the peroxide. If you get this solution in your eyes, it is highly recommended that you go to the Emergency Room and get your eye(s) irrigated.[48]
• Enzymatic cleaner – Used for cleaning protein deposits off lenses, usually weekly, if the daily cleaner is not sufficient. Typically, this cleaner is in tablet form. Protein deposits make use of contact lenses uncomfortable, and may lead to various eye problems.
Some products must only be used with certain types of contact lenses: it is important to check the product label to make sure that it can be used for a given type of lens. Water alone should never be used to clean the contact lens itself as it will not adequately disinfect the lens. The use of water to clean contact lenses may lead to lens contamination and has been known in some cases to cause irreparable harm to the eye.[49] It is also important to follow the product's directions carefully to reduce risk of eye infection or eye irritation. In addition, one should remember to wash the contact cases or lens covers thoroughly with water and multipurpose solution or hydrogen peroxide to avoid formation of biofilms on its surfaces.
It is important to ensure that the product does not become contaminated with microorganisms: the tips of the containers for these solutions should never touch any surface, and the container should be kept closed when not in use. To counteract minor contamination of the product and kill microorganisms on the contact lens, some products may contain preservatives such as thiomersal, benzalkonium chloride, benzyl alcohol, and other compounds. In 1989, thiomersal was responsible for about 10% of problems related to contact lenses:[50] because of this, many products no longer contain thiomersal. Preservative-free products usually have shorter shelf life. For example, non-aerosol preservative-free saline solutions can typically be used for only two weeks once opened. The introduction of silicone-hydrogel soft contact lens materials in 1999 made selection of the proper disinfecting solution more important. One product that should not be used with PureVision™ silicone hydrogel lenses (Bausch & Lomb, Rochester, NY) is the Allergan Ultracare Disinfecting System™ (Allergan, Inc., Irvine, CA) or any of its components (Ultracare Disinfecting Solution, Ultracare Neutralizing Tablets, Lens Plus Daily Cleaner, and Ultrazyme Enzymatic Cleaner), as it is contraindicated for use with PureVision lenses.[51][52]
[edit] Current research
A large segment of current contact lens research is directed towards the treatment and prevention of conditions resulting from contact lens contamination and colonization by foreign organisms. It is generally accepted by clinicians that the most significant complication of contact lens wear is microbial keratitis and that the most predominant microbial pathogen is Pseudomonas aeruginosa.[53] Other organisms are also major causative factors in bacterial keratitis associated with contact lens wear, although their prevalence varies across different locations. These include both the Staphylococcus species (aureus and epidermidis) and the Streptococcus species, among others.[54][55] Microbial keratitis is a serious focal point of current research due to its potentially devastating effect on the eye, including severe vision loss.[56]
One specific research topic of interest is how microbes such as Pseudomonas aeruginosa invade the eye and cause infection. Although the pathogenesis of microbial keratitis is not well understood, many different factors have been investigated. One group of researchers showed that corneal hypoxia exacerbated Pseudomonas binding to the corneal epithelium, internalization of the microbes, and induction of the inflammatory response.[57] One way to alleviate hypoxia is to increase the amount of oxygen transmitted to the cornea. Although silicone-hydrogel lenses almost eliminate hypoxia in patients due to their very high levels of oxygen transmissibility,[58] they also seem to provide a more efficient platform for bacterial contamination and corneal infiltration than other conventional hydrogel soft contact lenses. A recent study showed that Pseudomonas aeruginosa and Staphylococcus epidermis adhere much more strongly to silicone hydrogel contact lenses than conventional hydrogel contact lenses and that adhesion of Pseudomonas aeruginosa was 20 times stronger than adhesion of Staphylococcus epidermidis.[59] This might help to explain one reason why Pseudomonas infections are the most predominant.
Another important area of contact lens research deals with patient compliance. Compliance is a major issue surrounding the use of contact lenses because patient noncompliance often leads to contamination of the lens, storage case, or both.[60][61][62] The introduction of multipurpose solutions and daily disposable lenses have helped to alleviate some of the problems observed from inadequate cleaning but new methods of combating microbial contamination are currently being developed. A silver-impregnated lens case has been developed which helps to eradicate any potentially contaminating microbes that come in contact with the lens case.[63] Additionally, a number of antimicrobial agents are being developed that have been embedded into contact lenses themselves. Contact lenses with covalently attached Selenium molecules have been shown to reduce bacterial colonization without adversely affecting the cornea of a rabbit eye[64] and octylglucoside used as a contact lens surfactant significantly decreases bacterial adhesion.[65] These compounds are of particular interest to contact lens manufacturers and prescribing optometrists because they do not require any patient compliance to effectively attenuate the effects of bacterial colonization.
[edit] See also
• Bionic contact lens
• Corrective lens
• Eyeglass prescription
• Visual acuity
[edit] References
1. ^ [1]
2. ^ a b c Barr, J. "2004 Annual Report". Contact Lens Spectrum. January, 2005.
3. ^ National Consumer Affairs Center of Japan. NCAC News Vol. 12, No. 4. NCAC News. March, 2001.
4. ^ Sokol JL, Mier MG, Bloom S, Asbell PA. "A study of patient compliance in a contact lens-wearing population." CLAO J. 1990 Jul-Sep;16(3):209-13. PMID 2379308
5. ^ Heitz, RF and Enoch, J. M. (1987) "Leonardo da Vinci: An assessment on his discourses on image formation in the eye." Advances in Diagnostic Visual Optics 19—26, Springer-Verlag.
6. ^ "The History of Contact Lenses." eyeTopics.com. Accessed October 18, 2006.
7. ^ Contact Lens Council
8. ^ Pearson RM, Efron N. Hundredth anniversary of August Müller's inaugural dissertation on contact lenses. Surv Ophthalmol. 1989 Sep-Oct;34(2):133-41. PMID 2686057
9. ^ Hellemans, Alexander; Bryan Bunch (1988). The Timetables of Science. New York, New York: Simon and Schuster. pp. 367. ISBN 0671621300.
10. ^ Robert B. Mandell. Contact Lens Practice, 4th Edition. Charles C. Thomas, Springfield, IL, 1988.
11. ^ U.S. Patent No. 2,510,438, filed February 28, 1948.
12. ^ "The Corneal Lens", The Optician, September 2, 1949, pp. 141–144.
13. ^ "Corneal Contact Lenses", The Optician, September 9, 1949, p. 185.
14. ^ "New Contact Lens Fits Pupil Only", The New York Times, February 11, 1952, p. 27.
15. ^ Pearce, Jeremy (2007-09-23). ""Norman Gaylord, 84; helped develop type of contact lens"". (New York Times News Service). The Boston Globe. http://www.boston.com/news/globe/obituaries/articles/2007/09/23/norman_gaylord_84_helped_develop_type_of_contact_lens/. Retrieved 2007-10-06.
16. ^ Wichterle O, Lim, D. "Hydrophilic gels for biological use". Nature. 1960; 185:117–118.
17. ^ Agarwal, Rishi K. (1972), Some Thoughts on Soft Lenses, The Contact Lens, volume 4, number 1, page 28.
18. ^ Editorial note (1988), American Journal of Optometry and Physiological Optics, volume 65, number 9, page 744.
19. ^ a b "Looking at Silicone Hydrogels Across Generations". Optometric Management. http://www.optometric.com/article.aspx?article=101727. Retrieved April 5, 2009.
20. ^ "What are the types of contact lenses?"
21. ^ "Different types of contact lenses."
22. ^ Hartenbaum NP, Stack CM. "Color vision deficiency and the X-Chrom lens." Occup Health Saf. 1997 Sep;66(9):36-40, 42. PMID 9314196.
23. ^ Swarbrick HA, Nguyen P, Nguyen T, Pham P. The X-Chrom lens. On seeing red. Surv Ophthalmol. 1981 Mar-Apr;25(5):312-24. PMID 6971497.
24. ^ Swarbrick HA, Nguyen P, Nguyen T, Pham P. "The ChromaGen contact lens system: color vision test results and subjective responses." Ophthalmic Physiol Opt. 2001 May;21(3):182-96. PMID 11396392.
25. ^ Harris D “Colouring Sight: A study of CL fittings with colour enhancing lenses” 'Optician' 8 June 1997
26. ^ Harris DA, MacRow-Hill SJ “Application of ChromaGen haploscopic lenses to patients with dyslexia: a double masked placebo controlled trial” Journal of the American Optometric Association 25/10/99.
27. ^ "A Guide to Theatrical Contact Lenses" eyecontactguide.com Accessed 31 December 2006
28. ^ Morgan PB et al."International Contact Lens Prescribing in 2004: An analysis of more than 17,000 contact lens fits from 14 countries in 2004 reveals the diversity of contact lens practice worldwide." Contact Lens Spectrum. January 2005.
29. ^ http://www.mc.vanderbilt.edu/news/releases.php?release=1670
30. ^ EyeMDLink.com
31. ^ "45 COVERAGE ISSUES – SUPPLIES – DRUGS 11-91 45" (PDF). Centers for Medicare and Medicaid Services. http://new.cms.hhs.gov/manuals/downloads/Pub06_PART_45.pdf. Retrieved 2006-03-01.
32. ^ "Contact Lenses Employed for Drug Delivery."
33. ^ FDA Premarket Notification for "new silicone hydrogel lens for daily wear" 'July 2008.
34. ^ Lebow KA, Goldberg JB. "Characteristic of binocular vision found for presbyopic patients wearing single vision contact lenses." J Am Optom Assoc. 1975 Nov;46(11):1116-23. PMID 802938
35. ^ a b Cassin, B. and Solomon, S. Dictionary of Eye Terminology. Gainsville, Florida: Triad Publishing Company, 1990.
36. ^ Manufacture of soft contact lenses. "Manufacture of soft contact lenses".
37. ^ Federal Trade Commission. "The Strength of Competition in the Sale of Rx Contact Lenses: An FTC Study". February, 2005.
38. ^ a b "Fairness to Contact Lens Consumers Act". October 15, 2003.
39. ^ a b John Stamler. "Contact Lens Complications." eMedicine.com. September 1, 2004.
40. ^ Efron N (July 2007). "Contact lens-induced changes in the anterior eye as observed in vivo with the confocal microscope". Prog Retin Eye Res 26 (4): 398–436. doi:10.1016/j.preteyeres.2007.03.003. PMID 17498998. http://linkinghub.elsevier.com/retrieve/pii/S1350-9462(07)00025-0.
41. ^ Liu Z, Pflugfelder SC (January 2000). "The effects of long-term contact lens wear on corneal thickness, curvature, and surface regularity". Ophthalmology 107 (1): 105–11. PMID 10647727. http://linkinghub.elsevier.com/retrieve/pii/S0161-6420(99)00027-5.
42. ^ Hollingsworth JG, Efron N (June 2004). "Confocal microscopy of the corneas of long-term rigid contact lens wearers". Cont Lens Anterior Eye 27 (2): 57–64. doi:10.1016/j.clae.2004.02.002. PMID 16303530. http://linkinghub.elsevier.com/retrieve/pii/S1367-0484(04)00018-9.
43. ^ Zhivov A, Stave J, Vollmar B, Guthoff R (January 2007). "In vivo confocal microscopic evaluation of langerhans cell density and distribution in the corneal epithelium of healthy volunteers and contact lens wearers". Cornea 26 (1): 47–54. doi:10.1097/ICO.0b013e31802e3b55. PMID 17198013. http://meta.wkhealth.com/pt/pt-core/template-journal/lwwgateway/media/landingpage.htm?issn=0277-3740&volume=26&issue=1&spage=47.
44. ^ "Contact lens wearers warned about eye fungus". http://msnbc.msn.com/id/12170589/. Retrieved 2006-08-07.
45. ^ Hiti, K; Walochnik, J; Haller-Schober, E M; Faschinger, C; Aspöck, H (February 2002). "Viability of Acanthamoeba after exposure to a multipurpose disinfecting contact lens solution and two hydrogen peroxide systems". British Journal of Ophthalmology 86 (2): 144–146. doi:10.1136/bjo.86.2.144. PMID 11815336. PMC 1771011. http://bjo.bmj.com/cgi/content/abstract/86/2/144
46. ^ Early Report of Serious Eye Infections Associated with Soft Contact Lens Solution. CDC health advisory. May 25, 2007. CDCHAN-00260-2007-05-25-ADV-N
47. ^ Acanthamoeba Keratitis — Multiple States, 2005–2007. Center for Disease Control MMWR dispatch. May 26, 2007 / 56(Dispatch);1-3
48. ^ Hughes, Reanne; Kilvington, Simon (July 2001). "Comparison of Hydrogen Peroxide Contact Lens Disinfection Systems and Solutions against Acanthamoeba polyphaga". Antimicrobial Agents and Chemotherapy 45 (7): 50–57. doi:10.1128/AAC.45.7.2038-2043.2001. PMID 11408220. PMC 90597. http://aac.asm.org/cgi/content/full/45/7/2038
49. ^ Contact Lens Wearing Guide
50. ^ Wilson-Holt N, Dart JK. "Thiomersal keratoconjunctivitis, frequency, clinical spectrum and diagnosis." Eye. 1989;3 ( Pt 5):581–7. PMID 2630335
51. ^ PureVision™ (balafilcon A) package insert. Bausch & Lomb; Rochester, NY. [2]
52. ^ Snyder, C. Silicone hydrogel lenses: Q&A with Bausch & Lomb and CIBA Vision. ICLC. 2000;27:158–64.
53. ^ Robertson, DM, Petroll, WM, Jester, JV & Cavanagh, HD: Current concepts: contact lens related Pseudomonas keratitis. Cont Lens Anterior Eye, 30: 94–107, 2007.
54. ^ Sharma, S, Kunimoto, D, Rao, N, Garg, P & Rao, G: Trends in antibiotic resistance of corneal pathogens: Part II. An analysis of leading bacterial keratitis isolates, 1999.
55. ^ Verhelst D, Koppen C, Looveren JV, Meheus A, Tassignon M (2005) Clinical, epidemiological and cost aspects of contact lens related infectious keratitis in Belgium: results of a seven-year retrospective study. Bull Soc Belge Ophtalmol 297:7–15.
56. ^ Burd EM, Ogawa GSH, Hyndiuk RA. Bacterial keratitis and conjunctivitis. In: Smolin G, Thoft RA, editors. The Cornea. Scientific Foundations and Clinical Practice. 3rd ed. Boston: Little, Brown, & Co, 1994. p 115–67.
57. ^ Zaidi, T, Mowrey-McKee, M & Pier, GB: Hypoxia increases corneal cell expression of CFTR leading to increased Pseudomonas aeruginosa binding, internalization, and initiation of inflammation. Invest Ophthalmol Vis Sci, 45: 4066–74, 2004.
58. ^ Sweeney DF, Keay L, Jalbert I. Clinical performance of silicone hydrogel lenses. In Sweeney DF, ed. Silicone Hydrogels: The Rebirth of Continuous Wear Contact Lenses. Woburn, Ma: Butterworth Heinemann; 2000.
59. ^ Kodjikian, L, Casoli-Bergeron, E, Malet, F, Janin-Manificat, H, Freney, J, Burillon, C, Colin, J & Steghens, JP: Bacterial adhesion to conventional hydrogel and new silicone hydrogel contact lens materials. Graefes Arch Clin Exp Ophthalmol, 246: 267–73, 2008.
60. ^ Yung MS, Boost M, Cho P, Yap M. Microbial contamination of contact lenses and lens care accessories of soft contact lens wearers (university students) in Hong Kong. Ophthalmic and Physiological Optics, 2007 Jan;27(1):11–21.
61. ^ J. Midelfart, A. Midelfart and L. Bevanger, Microbial contamination of contact lens cases among medical students, CLAO J 22 (1996) (1), pp. 21–24.
62. ^ T.B. Gray, R.T. Cursons, J.F. Sherwan and P.R. Rose, Acanthamoeba, bacterial, and fungal contamination of contact lens storage cases, Br J Ophthalmol 79 (1995), pp. 601–605.
63. ^ Amos, CF & George, MD: Clinical and laboratory testing of a silver-impregnated lens case. Cont Lens Anterior Eye, 29: 247-55, 2006.
64. ^ Mathews, SM, Spallholz, JE, Grimson, MJ, Dubielzig, RR, Gray, T & Reid, TW: Prevention of bacterial colonization of contact lenses with covalently attached selenium and effects on the rabbit cornea. Cornea, 25: 806–14, 2006.
65. ^ Santos, L, Rodrigues, D, Lira, M, Oliveira, R, Real Oliveira, ME, Vilar, EY & Azeredo, J: The effect of octylglucoside and sodium cholate in Staphylococcus epidermidis and Pseudomonas aeruginosa adhesion to soft contact lenses. Optom Vis Sci, 84: 429–34, 2007.
[edit] Further reading
• Efron, Nathan (2002). Contact Lens Practice, Elsevier Health Sciences. ISBN 0-7506-4690-X.
[edit] External links
Wikimedia Commons has media related to: Contact lens
• British Contact Lens Association
• Contact Lens & Anterior Eye Journal
• Video How Contact Lenses are Manufactured
• Contact Lens History